Warranty Information   Please retain all receipts pertaining to this warranty in the event of a warranty repair. Rotary Doctor suggests that you continue to follow the maintenance schedule even after the warranty expires in order to extend the life of your engine. If you have any questions, comments, or concerns you may call us at 253-732-2698, e-mail us at info@rotarydoctor.com, or write to us.   Installation Information   Before installing and starting the rebuilt engine, the following must be done to insure a safe installation: A. Flow check the radiator, and service as advised (rod out, repair, or replace if needed). B. Flush the oil cooler to prevent debris from the oil from contaminating the new engine. OR C. Replace the oil cooler if you find any bearing material in the oil pan or the oil filter. D. Install a new factory style thermostat. E. Change any defective parts such as hoses, clamps, water pump, et cetera, that may affect the cooling     system. Follow the removal and installation procedures as outlined in your Chilton's or Haynes repair manuals. Do not prime the engine oil system as instructed in these manuals, as the engine is primed at our shop for you. Cranking on this engine without starting it can and will cause premature bearing failure. After installation please start the engine in the normal fashion. Bearing failure is not covered as a manufacturer defect.   Rebuilt Engine Limited Warranty   A. Warranty applies to rotary engines rebuilt by Rotary Doctor. Rotary Doctor warrants that each rebuilt rotary engine shall be free from defects and material under normal use and maintenance and subject to the following terms and conditions. B. Terms of Warranty: The warranty period is for 24 months or until such time that the rebuilt rotary engine has been operated for a distance of 24,000 miles, whichever comes first. The warranty period commences on the date of sale. Seller's warranty obligations are subject to Warranty Limitations outlined below and are limited to providing remedial service during the Seller's normal business hours and days during the warranty period and repairing or replacing at its option. Warranty applies to the engine, which has been promptly reported by the purchaser, during the warranty period, as defective in material and workmanship and is so found by Rotary Doctor upon inspection. The engine must be returned to ARS facilities to be examined, replaced, or repaired. If the engine is found to be defective, Rotary Doctor will examine, repair, and/or replace the engine at the seller's facilities at no charge to the purchaser for time and parts expended. The warranty specifically covers all parts and no purchaser labor. If the engine is not found to be defective or is not for some other reason within the warranty coverage, Rotary Doctor's service time expended, parts, and freight charges will be charged to the Purchaser. If repairs of the engine are not covered by warranty, ARS will not make any repairs without first obtaining permission from the Purchaser. The Purchaser shall be responsible for all maintenance service procedures consistent with normal operations. The warranty is non-transferable between the original purchaser and subsequent purchasers.   Warranty Limitations   This warranty shall not apply to any of the following: A. Any repair or replacement as a result of accident, misuse, lack of proper maintenance according to the following page, repairs or maintenance improperly performed, or failure of any component or part other than the rebuilt rotary engine. B. Any rotary rebuilt engine that is used for competition, racing, or other related purposes. C. Any repair or replacement as a result of normal wear and tear, including without limitation, points, plugs, filters, belts, thermostat, air pump, et cetera. D. Any rotary rebuilt engine that is installed in the improper model, or on a vehicle whose odometer has been altered or whose actual mileage cannot be determined. E. Any bearing failure as this is generally caused by abuse, accident, low / no oil pressure, no oil, or debris. F. Any gear failure as this is generally caused by to abuse, accident, or high rpms. G. Any melted seals as this is generally caused by to abuse, accident, or overheating. H. Any repair / failure due to broken or fractured apex seals. This is caused by pre-ignition, incorrect timing, high rpms, high boost, et cetera. I.  Any foreign debris. After engine compression testing the engine is sealed to prevent any foreign objects. Extreme care must be taken during installation, as this can easily happen while installing your accessories to the engine. J. Any boost pressure applied to the engine above stock. K. Any aftermarket induction system installed on the car.   Required information for any warranty repair:   A. Proof of purchase, i.e. original invoice. B. Proof of radiator flow check, and rod out, repair or replace as advised. C. Proof of oil cooler flush Disclaimer of Unstated Warranties The warranty printed above is the only warranty applicable to this purchase. All other warranties, expressed or implied, including but not limited to warranties of merchantability and fitness for a particular purpose are disclaimed. Limitation of Liability It is understood and agreed that Rotary Doctor's liability whether in contract, in tort, under any warranty, in negligence or otherwise shall not exceed the return of the amount of the original purchase price paid by the Purchaser and under no circumstances shall ARS be liable for special, indirect, labor or consequential damages. The price stated for the engine is consideration in limiting Rotary Doctor's liability. No action regardless of form, arising out of the transaction under this agreement may be brought more than one year after the cause of action accrued. I have received a copy, read, and understand and agree to the terms and conditions of this warranty. Customer signature _____________________________ Date of sale________________ Printed name __________________________________ Mileage ___________________ Engine # _____________________ Invoice # __________________________________   Required Maintenance Schedule   All services must be performed at or before the required date or mileage, whichever comes first. 3,000 miles or 3 months Check belts & hoses Check coolant levels & pressure test Check condition of spark plugs Change oil & Filter (5 quarts) Serviced by:_____________________ Date:____________ Mileage_________ 6,000 miles or 6 months Check air filter & fuel filter, replace if needed Check oil level Check condition of spark plugs, replace if needed Change oil & filter Serviced by:_____________________ Date:____________ Mileage_________ 9,000 miles or 9 months check oil metering lines, replace if needed check water pump check condition of spark plugs Change oil & filter Serviced by:_____________________ Date:____________ Mileage_________ 12,000 miles or 12 months Check belts & hoses Check oil level Change coolant & back flush system Change oil & filter Serviced by:_____________________ Date:____________ Mileage_________ 15,000 miles or 15 months Check belts & hoses Check coolant levels & pressure test Check condition of spark plugs Change oil & Filter Serviced by:_____________________ Date:____________ Mileage_________ 18,000 miles or 18 months Check air filter & fuel filter, replace if needed Check oil level Check condition of spark plugs, replace if needed Change oil & filter Serviced by:_____________________ Date:____________ Mileage_________ 21,000 miles or 21 months C heck oil metering lines, replace if needed C heck water pump C heck condition of spark plugs Change oil & filter Serviced by:_____________________ Date:____________ Mileage_________ 24,000 miles or 24 months Check belts & hoses Check oil level Change coolant & back flush system Change oil & filter Serviced by:_____________________ Date:____________ Mileage_________   Close This Window